Changing oil and filters on trucks

"DVS auto" carries out maintenance of cars and trucks. Oil is selected according to the manufacturer's regulations, filters are changed in accordance with the wishes of customers. Lubricants used in the work are purchased exclusively from official representatives. This guarantees their originality, high quality of work.

Works to be performed

By contacting us, you can order the following services:

  • prompt oil change in engines, as well as manual transmission, power steering, in the axle / gearbox;
  • complete or hardware oil change in automatic transmissions of various modifications with removal, installation of a pan or without additional work;
  • removal, installation of the pallet on a mechanical, automatic transmission, gearbox;
  • partial oil change in vending machines of various types without removing the sump;
  • oil change along with filter change in Haldex coupling;
  • changing an oiler;
  • replacement of coolant;
  • replacing the oil filter with or without changing the lubricant, as well as the flow filter on any automatic transmission;
  • replacement of oil, fuel filters for gasoline, diesel.

Oil change

Lubricants intended for heavy-duty vehicles are highly resistant to oxidative processes, able to protect the tractor engine from the negative effects of fuel containing a large amount of sulfur.

The frequency with which the oil is changed on a truck is regulated by the manufacturer. While the tractor is under warranty, maintenance is carried out in accordance with the terms specified in the technical documentation.

After the end of the warranty, many tractor owners increase the interval. It is recommended to change the oil every 10,000 - 60,000 kilometers, and after every 1,000 kilometers, check the level with a dipstick. With a low intensity of vehicle operation, engine oil must be changed at least once a year, even if the required kilometers have not been covered.

When contacting "DVS auto", you will receive qualified advice on the selection of engine oil for a truck, the timing of its replacement, and you will be able to quickly perform engine overhauls. Replacing the lubricant on the truck can be done by hardware, which ensures a more complete removal of used oil, sediment, and a reduction in the time spent on the procedure.

Service station replacement procedure:

  • change engine oil only when the engine is cold;
  • in the process of updating the lubricant, temperature sensors also change;
  • The engine is being flushed; change the filter (if necessary).

For cars manufactured in the 90s with Euro II and Euro III engines, API CF / CF-2, CG and CH oils are recommended. For Euro IV, API CI class oils are recommended.

Attention: at the request of customers, we can fill in any oil of well-known brands, if it is bought on our own.

Replacing filters

The condition of the filters on the truck is assessed during maintenance. Their untimely replacement can lead to costly repairs. Trucks use oil, fuel, cabin, air filters.

Replacement of filters is carried out together with the change of lubricant or separately. Additional work in progress:

  • after the overhaul;
  • after washing the engine or gearbox;
  • after a long period of inactivity.

You can tell when it's time to change filters by the following signs:

  • the power of the car has decreased;
  • the amount of exhaust gases has increased;
  • Fuel consumption has increased.

On a car with a diesel engine, it is not possible to check the condition of the fuel filter, so they change it according to the mileage. The fuel filter needs to be changed after 15,000 - 20,000 kilometers. It can be installed directly in the power system or located in the fuel tank along with the fuel pump. When using clogged filters, soot particles enter the power system, clog fuel injection nozzles, which leads to uneven operation of the power plant, loss of vehicle power. In some situations, the car will not be able to start at all.

Service station replacement procedure:

For cars manufactured in the 90s with Euro II and Euro III engines, API CF / CF-2, CG and CH oils are recommended. For Euro IV, API CI class oils are recommended.

At the service station "DVS auto" oil and filter changes are carried out in a short time, a one-year warranty is provided.

Our advantages

  • availability of consumables in stock and their quick replacement;
  • quality work;
  • honest attitude towards all clients;
  • affordable prices;
  • a convenient form of payment;
  • fast delivery of any custom parts;
  • guarded free parking for customers;
  • availability of all equipment for diagnostics.
  • Car Parts

    Tire fitting

    There is special equipment for changing tires with a diameter of 12 to 26 inches.

  • Car Parts

    Repair of passenger cars

    Car repair and service

  • Car Parts

    Body repair

    Welding works of any complexity. Sandblasting and all types of sandblasting.

  • Car Parts

    Lifts

    Cars and trucks lifts up to 14 tons per axle, large gates 4 x 4 meters

  • Car Parts

    Rest corner

    At the disposal of customers is a relaxation corner on the territory of the technical center, where you can drink coffee and relax in front of the TV.

  • Car Parts

    Guarded parking

    While you are waiting for the completion of the repair, your cargo transport will be under reliable security.